design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors + C f d l p r c w h 0.2 max. lot. no. polarity marking (?) series r. capacitance r. voltage surface mount type series : svpc low esr (9 m to 30 m ) large capacitance (2700 f max.) rohs compliance, halogen free size code b6 c6 e7 e12 f12 category temperature range C55 c to +105 c rated voltage range 2.5 v.dc to 16 v.dc 2.5 v.dc rated capacitance range 39 f to 180 f 68 f to 560 f 120 f to 680 f 270 f to 1500 f 2700 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +105 c, 2000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) marking unit : mm size code f d0.5 l +0.1 w0.2 h0.2 c0.2 r p0.2 b6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 c6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 e7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 e12 8.0 11.9 8.3 8.3 9.0 0.8 to 1.1 3.2 f12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 ?0.4 features speci cations dimensions (not to scale) ? externals of ? gure are the reference. feb. 2017 03 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications standard (reel size : f 380) f d l ripple ? 1 current (mar.m.s.) esr tan ? 2 lc ? 3 (a) part number min. packaging q'ty (pcs) 100 khz/20 c (m max.) 300 khz/20 c (m max.) svpc 2.5 180 5.0 5.9 b6 1970 30 26 0.12 300 2r5svpc180m 1500 5.0 5.9 2200 24 20 0.12 300 2r5svpc180my 1500 5.0 5.9 2800 19 16 0.12 300 2r5svpc180mv 1500 390 6.3 5.9 c6 2410 25 22 0.12 300 2r5svpc390m 1000 6.3 5.9 3160 15 13 0.12 300 2r5svpc390mv 1000 560 6.3 5.9 3500 16 14 0.12 300 2r5svpc560m 1000 680 8.0 6.9 e7 3370 20 17 0.12 500 2r5svpc680m 1000 820 8.0 11.9 e12 5380 9 8 0.15 500 2r5svpc820m 400 1500 8.0 11.9 5150 10 9 0.15 750 2r5svpc1500m 400 2700 10.0 12.6 f12 5070 12 10 0.15 1350 2r5svpc2700m 400 4.0 150 5.0 5.9 b6 1970 30 26 0.12 300 4svpc150m 1500 5.0 5.9 2240 23 20 0.12 300 4svpc150my 1500 5.0 5.9 2730 20 17 0.12 300 4svpc150mv 1500 330 6.3 5.9 c6 2320 27 23 0.12 300 4svpc330m 1000 6.3 5.9 2630 21 18 0.12 300 4svpc330my 1000 6.3 5.9 3160 15 13 0.12 300 4svpc330mv 1000 560 8.0 6.9 e7 3220 22 19 0.12 500 4svpc560m 1000 8.0 11.9 e12 5380 9 8 0.15 500 4svpc560mx 400 1200 8.0 11.9 4700 12 10 0.15 960 4svpc1200m 400 1500 8.0 11.9 4700 12 10 0.15 1200 4svpc1500m 400 6.3 100 5.0 5.9 b6 1970 30 26 0.12 300 6svpc100m 1500 5.0 5.9 2150 25 21 0.12 300 6svpc100my 1500 120 5.0 5.9 2660 21 18 0.12 300 6svpc120mv 1500 220 6.3 5.9 c6 2320 27 23 0.12 300 6svpc220m 1000 6.3 5.9 3160 15 13 0.12 300 6svpc220mv 1000 330 6.3 5.9 3390 17 15 0.12 415 6svpc330m 1000 390 8.0 6.9 e7 3220 22 19 0.12 491 6svpc390m 1000 820 8.0 11.9 e12 4700 12 10 0.15 1033 6svpc820m 400 10 68 5.0 5.9 b6 1970 30 26 0.12 300 10svpc68m 1500 5.0 5.9 2540 23 20 0.12 300 10svpc68mv 1500 120 6.3 5.9 c6 2320 27 23 0.12 300 10svpc120m 1000 6.3 5.9 2600 22 19 0.12 300 10SVPC120MV 1000 270 8.0 6.9 e7 3220 22 19 0.12 500 10svpc270m 1000 330 8.0 6.9 3460 19 17 0.12 660 10svpc330m 1000 16 39 5.0 5.9 b6 1820 35 30 0.12 300 16svpc39m 1500 5.0 5.9 2350 27 23 0.12 300 16svpc39mv 1500 68 6.3 5.9 c6 2200 30 26 0.12 300 16svpc68m 1000 6.3 5.9 2440 25 22 0.12 300 16svpc68mv 1000 100 6.3 5.9 2490 24 23 0.12 300 16svpc100m 1000 120 8.0 6.9 e7 2900 27 23 0.12 500 16svpc120m 1000 150 8.0 6.9 3220 22 21 0.12 500 16svpc150m 1000 270 8.0 11.9 e12 4070 16 14 0.15 864 16svpc270m 400 ? 1 ripple current (100 khz/ +105 c ), ? 2 tan (120 hz/+20 c) ? 3 after 2 minutes please refer to each page in this catarog for reflow conditions and taping specifications. frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 frequency correction factor for ripple current characteristics list feb. 2017 03 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
